HMS - DEVICENET MASTER-PROFIBUS SLAVE - AB7663
/ each
£899.00
Delivery
Essential specifications
Supply voltage DC - 24...24 V
Supporting protocol for TCP/IP - no
Supporting protocol for PROFIBUS - no
Supporting protocol for MODBUS - no
Voltage type of supply voltage - DC
Packaging
1 each
GTIN
Supplier Ref
AB7663
Manufacturer Ref
AB7663
Commercial Reference
AB7663
Supply voltage DC:
24...24 V
Supporting protocol for TCP/IP:
no
Supporting protocol for PROFIBUS:
no
Supporting protocol for MODBUS:
no
Voltage type of supply voltage:
DC
Supporting protocol for Data-Highway:
no
Supporting protocol for DeviceNet:
no
Supporting protocol for PROFINET IO:
no
Supporting protocol for EtherNet/IP:
no
Supporting protocol for DeviceNet Safety:
no
Supporting protocol for other bus systems:
yes
IO link master:
no
IP-rating:
IP20
Rail mounting possible:
yes
Wall mounting/direct mounting:
no
Front installation possible:
yes
Rack-assembly possible:
no
Width:
44 mm
Height:
127 mm
Depth:
114 mm
Anybus X-gateway – DeviceNet Scanner - PROFIBUS Slave
- Fast copying of cyclic I/O data between two networks (10-15 ms)
- Proven and tested with all PLC manufacturers
- Supports up to a maximum of 512 bytes of Input and Output data in each direction
- Powerful Scanner interface for DeviceNet eliminates the need for a PLC controller
- Optional control and status information added to the I/O data for diagnostic purposes
- Robust stand-alone housing for use in harsh industrial environments
- Global free technical support and consultancy
- DeviceNet Scanner/Master features
- An Anybus X-gateway with an integrated DeviceNet Scanner interface can be used when there is no existing DeviceNet controlling PLC.
- DeviceNet CONFORMANCE TESTED™ by ODVA
- DeviceNetNet Specification version: Communications Adapter profile 12
- Supports up to 63 DeviceNet Adapter/Slaves
- Max. 512 bytes of Input and 512 bytes of Output data
- Optional Live List of the active status of the connected adapters
- DeviceNet baudrate 125, 250, 500 kbit/s
- Supports I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
- MacID node address setting via DIP switches
- DeviceNet Scanner/Adapter network configuration via in-built web interface or RSLogix/Studio5000 software
- 1x 5-pin, 5.08 Phoenix plug connector
- PROFIBUS Slave interface
- PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC.
- Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
- Supports Class 1 & Class 2 services
- Automatic baudrate detection up to 12Mbit/s
- Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 344 bytes total (in+out)
- Acyclic User Parameter data / Diagnostics length - up to 237 bytes
- Supports PROFIBUS features: Sync and Freeze and Watchdog
- PROFIBUS slave settings via on-board switches or vis .GSD file
- 1x D-sub 9-pin female PROFIBUS connector
HMS
Explore more products in this series
