HMS - PROFIBUS MASTER / ETHERCAT - AB7696

Anybus X-gateway – PROFIBUS Master - EtherCAT Slave

• Fast copying of cyclic I/O data between two networks (10-15 ms)

• Proven and tested with all PLC manufacturers

• Supports up to a maximum of 512 bytes of Input and Output data in each direction

• Powerful Master interface for PROFIBUS eliminates the need for a PLC controller

• Optional control and status information added to the I/O data for diagnostic purposes

• Robust stand-alone housing for use in harsh industrial environments

• Global free technical support and consultancy

• PROFIBUS Master/Scanner interface

• An Anybus X-gateway with an integrated PROFIBUS Master interface can be used when there is no existing PROFIBUS controlling PLC.

• Complete Profibus DP Master functionality according to IEC 61158

• Controls up to 125 slaves

• Optional Live List of the active status of the connected slaves

• Maximum 512 bytes of I/O data in each direction

• Supports all baudrates up to 12Mbit/s

• Profibus Master/Slave configuration via the included Anybus Configuration Manager Windows tool via an RS-232 configuration port

• 1x D-Sub9 Male and 1x D-Sub9 Female connector

• EtherCAT Slave interface

• EtherCAT Slave settings can be made by importing the provided .XML file into engineering tool of the controlling PLC.

• Complete EtherCAT slave according to DS 301 V4.022

• Supports CANopen over EtherCAT

• Max 512 bytes of Input and 512 bytes of Output data (PDO + SDO)

• Baudrate 100 Mbit/s full duplex

• 4 FMMU channels (can be used freely by the EtherCAT master for any purpose.)

• 4 SM channels

• Bit-oriented FMMU operation

• Position addressing, node addressing and logical addressing

• PDI Watchdog

• Output I/O Sync Manager Watchdog

• Integrated switch allowing for a daisy-chain topology

• 2x RJ45 EtherCAT connectors