Phoenix Contact - DOKD 1,5-TG - 3011054
/ 50 each
£5.86
Delivery
Essential specifications
Connectable conductor cross section fine-strand without cable end sleeve - 0.2...2.5 mm²
Rated current In - 24 A
Rated voltage - 250 V
Number of clamp positions per level - 2
Type of electrical connection 1 - Screw connection
Packaging
1 each
GTIN
4017918091910
Supplier Ref
3011054
Manufacturer Ref
3011054
Commercial Reference
3011054
Connectable conductor cross section fine-strand without cable end sleeve:
0.2...2.5 mm²
Rated current In:
24 A
Rated voltage:
250 V
Number of clamp positions per level:
2
Type of electrical connection 1:
Screw connection
Connectable conductor cross section fine-strand with cable end sleeve:
0.25...2.5 mm²
Connectable conductor cross section solid-core:
0.2...4 mm²
Connectable conductor cross section multi-wired:
0.2...2.5 mm²
Number of levels:
3
Internally connected levels:
no
Type of electrical connection 2:
Screw connection
Mounting method:
DIN rail (top hat rail) 35 mm
Material insulation body:
Thermoplastic
Inflammability class of insulation material acc. with UL94:
V2
Width:
6.2 mm
Depth:
63 mm
Explosion-tested version 'Ex e':
no
End plate required:
no
Colour:
Grey
With PE connection:
yes
Sensor/actuator terminal block, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
- Same shape as DIK ... three-level initiator terminal blocks
- The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
- Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
- Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
- The upper level contains the feed-through connections for the signal cable which can be labeled
- Alternate wiring of an actuator followed by an initiator is easy
- Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
- The middle level supplies the connected actuators with power
