Phoenix Contact - IB IL 24 DI 32/HD-PAC - 2862835
/ each
£254.15
Delivery
Essential specifications
Supply voltage DC - 7.5...24 V
Number of digital inputs - 32
Number of digital outputs - 0
Type of digital output - None
Voltage type of supply voltage - DC
Packaging
1 each
GTIN
4017918907594
Supplier Ref
2862835
Manufacturer Ref
2862835
Commercial Reference
2862835
Supply voltage DC:
7.5...24 V
Number of digital inputs:
32
Number of digital outputs:
0
Type of digital output:
None
Voltage type of supply voltage:
DC
Input current at signal 1:
2.8 mA
Permitted voltage at input:
-30...30 V
Type of input voltage:
DC
Output current:
0 A
Number of HW-interfaces industrial Ethernet:
0
Number of HW-interfaces PROFINET:
0
Number of HW-interfaces RS-232:
0
Number of HW-interfaces RS-422:
0
Number of HW-interfaces RS-485:
0
Number of HW-interfaces serial TTY:
0
Number of HW-interfaces parallel:
0
Number of HW-interfaces Wireless:
0
Number of HW-interfaces USB:
0
Number of HW-interfaces other:
0
With optical interface:
no
Supporting protocol for TCP/IP:
no
Supporting protocol for PROFIBUS:
no
Supporting protocol for CAN:
no
Supporting protocol for INTERBUS:
no
Supporting protocol for ASI:
no
Supporting protocol for KNX:
no
Supporting protocol for MODBUS:
no
Supporting protocol for Data-Highway:
no
Supporting protocol for DeviceNet:
no
Supporting protocol for SUCONET:
no
Supporting protocol for LON:
no
Supporting protocol for PROFINET IO:
no
Supporting protocol for PROFINET CBA:
no
Supporting protocol for SERCOS:
no
Supporting protocol for Foundation Fieldbus:
no
Supporting protocol for EtherNet/IP:
no
Supporting protocol for AS-Interface Safety at Work:
no
Supporting protocol for DeviceNet Safety:
no
Supporting protocol for INTERBUS-Safety:
no
Supporting protocol for PROFIsafe:
no
Supporting protocol for SafetyBUS p:
no
Supporting protocol for other bus systems:
yes
Radiostandard Bluetooth:
no
Radiostandard WLAN 802.11:
no
IO link master:
no
System accessory:
yes
IP-rating:
IP20
Type of electric plug connection:
Spring clamp connection
Signal change delay:
2...2 ms
Fieldbus connection via separate bus coupler possible:
yes
Rail mounting possible:
yes
Wall mounting/direct mounting:
no
Front installation possible:
no
Rack-assembly possible:
no
Suitable for safety functions:
no
Appendant operation agent (Ex ia):
no
Appendant operation agent (Ex ib):
no
Explosion safety category for gas:
None
Explosion safety category for dust:
None
Width:
48.8 mm
Height:
119.8 mm
Depth:
71.5 mm
Inline, Digital input terminal, Digital inputs: 32, 24 V DC, Connection method: 1-wire, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connectors and marking fields
- The digital Inline input terminals are designed for the connection of digital signals as are supplied from control switches, limit switches or proximity switches.
- All the typical applications are covered by the standard automation terminals.
- The I/O equipment is connected by a simple or an extended Inline connector, depending on the number of channels. The multi-wire connection method is available in both cases.
- The Inline terminals can be labeled using hinged labeling fields. The fields have insert cards that can be labeled individually to suit the application. Additionally, there is the proven ZBFM-6... Zack strip for labeling the terminal points.
- Your advantages
- Connections for 2 digital sensors, npn-wired
- Connection of sensors in 2, 3, and 4-wire technology
- Maximum permissible load current per sensor: 250 mA
- Diagnostic and status indicators
