Prosoft - DNP 3.0 Master/Slave Communication Modul - MVI56-DNP
Delivery
Essential specifications
Number of HW-interfaces industrial Ethernet - 0
Number of HW-interfaces RS-232 - 3
Number of HW-interfaces RS-485 - 2
Supporting protocol for TCP/IP - no
Transmission rate - 115.2 kBit/s
Packaging
1 each
GTIN
Supplier Ref
MVI56-DNP
Manufacturer Ref
MVI56-DNP
Commercial Reference
MVI56-DNP
Number of HW-interfaces industrial Ethernet:
0
Number of HW-interfaces RS-232:
3
Number of HW-interfaces RS-485:
2
Supporting protocol for TCP/IP:
no
Transmission rate:
115.2 kBit/s
Number of HW-interfaces PROFINET:
0
Number of HW-interfaces RS-422:
2
Number of HW-interfaces USB:
0
Number of HW-interfaces other:
0
Supporting protocol for PROFIBUS:
no
Supporting protocol for MODBUS:
no
Supporting protocol for DeviceNet:
no
Supporting protocol for EtherNet/IP:
no
Supporting protocol for other bus systems:
yes
Redundancy:
no
Explosion safety category for gas:
None
Explosion safety category for dust:
None
Width:
34 mm
Height:
145 mm
Depth:
139 mm
ControlLogix. DNP 3.0 master/slave module. 2 x serial ports
- The DNP 3.0 Master/Slave Network Interface Module allows ControlLogix processors to interface with the many field devices that support the DNP protocol. DNP (Distributed Network Protocol) is an open communication protocol developed to achieve interoperability among systems specifically in the electric utility, oil & gas and water/wastewater industries. This non-proprietary protocol, available worldwide, was designed to optimize the transmission of data acquisition information and control commands. It is a highly efficient and reliable communications protocol between substation computers, RTUs, IEDs and master stations. DNP is also a layered protocol, featuring time stamping and True Report by Exception (TRBE). These features allow the MVI56-DNP module to send a report to the processor without being polled, providing real time data transmission in critical situations.
Prosoft
Explore more products in this series
